Copy and Paste  -   An Application to Copy/Paste Text  

 
S.No 4830 Name tuto Date/Time 08-May-2022 07:49:22 PM

Copy text from below

STEP 1: SETTING UP THE WEBCAM

 

 

Open up the terminal and run:

 

sudo su

 

Press Enter

 

This will change to admin console

 

Now write:

 

sudo apt-get update

 

 

 

After this finishes running, we should test that the webcam works. 

 

Plug your webcam into the Raspberry PI and run:

 

sudo apt-get install fswebcam 

 

(This will install the driver for the webcam)

 

fswebcam test.jpg

 

(This will take a picture from your webcam.

 

Open the file manager and see if there is a photo.)

 

 

STEP 2: INSTALLING AND CONFIGURING MOTION

 

 

In order to turn our webcam into a motion detector, we will be using the open-source "motion" library which 

was designed just for this purpose.

 

First, install motion by running:

 

sudo apt-get install motion

 

 

After the motion is installed, we need to install a file explorer using which we can edit the motion.conf file

 

For that purpose, give the following command:

 

sudo su

 

 

 

sudo apt-get install nautilus-admin

 

 

Now in terminal, write:

 

sudo su

 

nautilus

 

This will open a file manager window

 

 

Next,open the file manager and navigate to this path:

 

 

 

/etc/motion/motion.conf

 

perform the following changes:

 

on_event_start python /home/pi/switch_on_motor.py

 

on_event_end python /home/pi/switch_off_motor.py

 

event_gap 20

 

 

////////////////// CODE FOR switch_on_motor.py ////////////////

import time

import pygame

import sys

import RPi.GPIO as GPIO

RelayPin = 37   # pin11

 

 

def relayActivate(s):

    

    if s == "ON":

        print("Relay is ON")

        GPIO.setmode(GPIO.BOARD)

        GPIO.setup(RelayPin, GPIO.OUT)

        GPIO.output(RelayPin, GPIO.HIGH)

    else:

        print("Relay is OFF")

        GPIO.setmode(GPIO.BOARD)

        GPIO.setup(RelayPin, GPIO.OUT)

        GPIO.output(RelayPin, GPIO.LOW)

        GPIO.cleanup()

 

relayActivate("ON")

 

 

 

 

 

pygame.init() #<-- initializes video

pygame.mixer.init()

pygame.mixer.music.load("/home/pi/dog_bark_long.wav")

pygame.mixer.music.play()

 

 

SONG_END = pygame.USEREVENT + 0

pygame.mixer.music.set_endevent(SONG_END)

 

 

while True:

    for event in pygame.event.get():

        if event.type == SONG_END:

            print("the song ended!")

            pygame.mixer.music.stop()

            pygame.quit()

            sys.exit()

 

///////////////////////////////////////

 

 

 

////////////////// CODE FOR switch_off_motor.py ////////////////

 

import time

import pygame

import sys

import RPi.GPIO as GPIO

RelayPin = 37   # pin11

 

 

def relayActivate(s):

    

    if s == "ON":

        print("Relay is ON")

        GPIO.setmode(GPIO.BOARD)

        GPIO.setup(RelayPin, GPIO.OUT)

        GPIO.output(RelayPin, GPIO.HIGH)

    else:

        print("Relay is OFF")

        GPIO.setmode(GPIO.BOARD)

        GPIO.setup(RelayPin, GPIO.OUT)

        GPIO.output(RelayPin, GPIO.LOW)

        GPIO.cleanup()

 

relayActivate("OFF")

 

 

////////////////////////////////////////////

 

 

After we have changed the settings,Run:

 

sudo motion

 

To kill motion, we can use following commands:

 

sudo su

 

ps -aux | grep motion

 

kill <id of motion>

 

 

Download and install VLC by opening up a new terminal and running:

 

sudo apt-get install vlc

 

Once VLC is set up, we can watch the webcam stream by running:

 

vlc http://localhost:8081/stream.mjpg

 

(NOTE:This should not be run with root(sudo su)or it will show an error)

 





comments powered by Disqus
NEW ENTRIES
S.No Name Entry Time/Date
4747 Massage Body 19-Jan-2022 09:51:39 AM
4746 Updated S3xy 17-Jan-2022 12:30:31 PM
4745 . 16-Jan-2022 10:51:56 PM
4744 16-Jan-2022 10:51:13 PM
4743 She Video 12-Jan-2022 07:17:23 AM
4742 Hot Videos 10-Jan-2022 11:34:57 AM
4741 09-Jan-2022 07:57:39 PM
4740 09-Jan-2022 07:56:05 PM
4739 Pinoy Hot 08-Jan-2022 09:25:19 AM
4738 Sexxy Girls 06-Jan-2022 10:15:17 AM
4737 table 04-Jan-2022 09:07:21 PM
4736 . 04-Jan-2022 11:14:01 AM
4735 Ryan Millar 31-Dec-2021 01:02:32 PM
4734 Moissanite.c 30-Dec-2021 03:58:09 PM
4733 29-Dec-2021 06:10:39 PM
4732 dropdown 28-Dec-2021 06:01:49 PM
4731 database 28-Dec-2021 05:09:53 PM
4730 labtask 28-Dec-2021 02:57:46 PM
4729 aa 23-Dec-2021 09:19:21 PM
4728 saad 23-Dec-2021 05:59:00 PM
4727 saad 23-Dec-2021 05:46:24 PM
4726 maaz 23-Dec-2021 05:44:59 PM
4725 Squeaky Clea 19-Dec-2021 02:34:02 PM
4724 Squeaky Clea 19-Dec-2021 02:33:17 PM
4723 Squeaky Clea 19-Dec-2021 10:56:49 AM
4722 Isra 18-Dec-2021 08:06:47 PM
4721 q7 18-Dec-2021 02:33:26 PM
4720 q6 18-Dec-2021 02:30:10 PM
4719 q5 18-Dec-2021 02:26:21 PM
4718 q4 18-Dec-2021 02:17:30 PM

[First] [Prev] 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 [Next] [Last]
 
web counter
web counter


To report any error messages or bugs, or other issues, please send email at: info@pakproject.com