Copy and Paste  -   An Application to Copy/Paste Text  

 
S.No 4830 Name tuto Date/Time 08-May-2022 07:49:22 PM

Copy text from below

STEP 1: SETTING UP THE WEBCAM

 

 

Open up the terminal and run:

 

sudo su

 

Press Enter

 

This will change to admin console

 

Now write:

 

sudo apt-get update

 

 

 

After this finishes running, we should test that the webcam works. 

 

Plug your webcam into the Raspberry PI and run:

 

sudo apt-get install fswebcam 

 

(This will install the driver for the webcam)

 

fswebcam test.jpg

 

(This will take a picture from your webcam.

 

Open the file manager and see if there is a photo.)

 

 

STEP 2: INSTALLING AND CONFIGURING MOTION

 

 

In order to turn our webcam into a motion detector, we will be using the open-source "motion" library which 

was designed just for this purpose.

 

First, install motion by running:

 

sudo apt-get install motion

 

 

After the motion is installed, we need to install a file explorer using which we can edit the motion.conf file

 

For that purpose, give the following command:

 

sudo su

 

 

 

sudo apt-get install nautilus-admin

 

 

Now in terminal, write:

 

sudo su

 

nautilus

 

This will open a file manager window

 

 

Next,open the file manager and navigate to this path:

 

 

 

/etc/motion/motion.conf

 

perform the following changes:

 

on_event_start python /home/pi/switch_on_motor.py

 

on_event_end python /home/pi/switch_off_motor.py

 

event_gap 20

 

 

////////////////// CODE FOR switch_on_motor.py ////////////////

import time

import pygame

import sys

import RPi.GPIO as GPIO

RelayPin = 37   # pin11

 

 

def relayActivate(s):

    

    if s == "ON":

        print("Relay is ON")

        GPIO.setmode(GPIO.BOARD)

        GPIO.setup(RelayPin, GPIO.OUT)

        GPIO.output(RelayPin, GPIO.HIGH)

    else:

        print("Relay is OFF")

        GPIO.setmode(GPIO.BOARD)

        GPIO.setup(RelayPin, GPIO.OUT)

        GPIO.output(RelayPin, GPIO.LOW)

        GPIO.cleanup()

 

relayActivate("ON")

 

 

 

 

 

pygame.init() #<-- initializes video

pygame.mixer.init()

pygame.mixer.music.load("/home/pi/dog_bark_long.wav")

pygame.mixer.music.play()

 

 

SONG_END = pygame.USEREVENT + 0

pygame.mixer.music.set_endevent(SONG_END)

 

 

while True:

    for event in pygame.event.get():

        if event.type == SONG_END:

            print("the song ended!")

            pygame.mixer.music.stop()

            pygame.quit()

            sys.exit()

 

///////////////////////////////////////

 

 

 

////////////////// CODE FOR switch_off_motor.py ////////////////

 

import time

import pygame

import sys

import RPi.GPIO as GPIO

RelayPin = 37   # pin11

 

 

def relayActivate(s):

    

    if s == "ON":

        print("Relay is ON")

        GPIO.setmode(GPIO.BOARD)

        GPIO.setup(RelayPin, GPIO.OUT)

        GPIO.output(RelayPin, GPIO.HIGH)

    else:

        print("Relay is OFF")

        GPIO.setmode(GPIO.BOARD)

        GPIO.setup(RelayPin, GPIO.OUT)

        GPIO.output(RelayPin, GPIO.LOW)

        GPIO.cleanup()

 

relayActivate("OFF")

 

 

////////////////////////////////////////////

 

 

After we have changed the settings,Run:

 

sudo motion

 

To kill motion, we can use following commands:

 

sudo su

 

ps -aux | grep motion

 

kill <id of motion>

 

 

Download and install VLC by opening up a new terminal and running:

 

sudo apt-get install vlc

 

Once VLC is set up, we can watch the webcam stream by running:

 

vlc http://localhost:8081/stream.mjpg

 

(NOTE:This should not be run with root(sudo su)or it will show an error)

 





comments powered by Disqus
NEW ENTRIES
S.No Name Entry Time/Date
4807 A 16-Apr-2022 11:14:41 AM
4806 F 15-Apr-2022 10:24:54 AM
4805 Link 12-Apr-2022 01:50:28 PM
4804 Shahbaz 12-Apr-2022 10:30:11 AM
4803 11-Apr-2022 08:13:42 PM
4802 Robert 07-Apr-2022 02:29:12 AM
4801 02-Apr-2022 11:49:42 PM
4800 Family Sexy 31-Mar-2022 07:53:45 AM
4799 28-Mar-2022 11:11:51 AM
4798 SexyFun 28-Mar-2022 09:30:25 AM
4797 25-Mar-2022 04:42:56 PM
4796 24-Mar-2022 10:09:53 AM
4795 New Videos 24-Mar-2022 09:00:17 AM
4794 22-Mar-2022 02:44:38 PM
4793 New Hot 21-Mar-2022 09:52:17 AM
4792 Bollywood 18-Mar-2022 08:52:26 AM
4791 16-Mar-2022 08:48:38 AM
4790 New H0t 14-Mar-2022 10:11:49 AM
4789 11-Mar-2022 12:03:01 PM
4788 H0t Videos 10-Mar-2022 08:46:13 AM
4787 09-Mar-2022 05:27:45 PM
4786 Sexy Hottest 08-Mar-2022 08:28:46 AM
4785 app 07-Mar-2022 06:57:11 PM
4784 Girls Boys 05-Mar-2022 08:41:23 AM
4783 SexyVideos 02-Mar-2022 09:24:48 AM
4782 NewSexy Vid 21-Feb-2022 10:17:49 AM
4781 while loop 20-Feb-2022 08:45:58 PM
4780 pile 19-Feb-2022 10:28:13 PM
4779 pydev 19-Feb-2022 07:56:41 PM
4778 . 19-Feb-2022 02:31:43 PM

[First] [Prev] 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 [Next] [Last]
 
web counter
web counter


To report any error messages or bugs, or other issues, please send email at: info@pakproject.com